how to install a dvd player to a tv with cable

#How to install a dvd player to a tv with cable how to

Now, for the red wire ( power ) you have a few options, you can connect it to the vehicles battery which requires running a long lead wire from the battery back to and under your seat. Then take the black wire, and secure it underneath that seat from bolt. The best option for this is usually to loosen one of the bolts that hold down the actual frame of the vehicle seat to the vehicle. Take the black wire and secure it below the seat to the vehicle. The red wire is for Power, and the black wire is for Ground. Now you have the power harness connected to the headrest monitors below the seat and you have your standard red/black 2 wire connection. If you do not want to use the cigarette adapters and would like to hardwire the power harness, read on. Once plugged in, take the cigarette adapter end and plug that directly into your vehicles 12 V outlet. You can simply take the cigarette adapter which was included in all our headrest monitor DVD packages, and plug it into the power harness adapter. Now you have 2 options to choose from for powering your headrest DVD monitor. Once connected you can now put the back of your seat cover in place if it was removed for your installation. ( Be sure to be gentle when plugging the two cables together, as to not damage the little 'pins' in the connector ) Now that you have the headrests in position and the headrest monitor cable pulled through, take your power harness which has your RCA connections and Power wires as well as your cigarette adapter connection, and using the S-Video type of connector, Plug it into your headrest cable. This is where the wiring connection to the power harness will be made.

Be sure to pull the cables that were run through your headrest monitor posts, down to the bottom of your seat. Take the headrest monitors with the two posts ( note the power cable is pre run through the headrest post already ) and drop the headrest into position through the post holes on the top of your seats. Remove the back of your seats if available. No, really, that makes it very easy to continue. Next, if your seats have removable backings, thank God. Next you will want to take your headrest monitor DVD players and gently pull apart on the headrest posts until the are the exact same distance apart as your factory headrest post. Once pressed, you should be able to slide the headrest and posts upward until they are removed leaving the 2 post holes available on the top of your seat. In many cases, this is done by pressing a button at the base of the headrest post on the top of the seat. Each installation will differ from vehicle to vehicle.įirst thing you will want to do is remove your factory headrest. Remember, this is just a guide to installing some of our headrest DVD player monitors. We thought we would address that issue for you buyers out there who are looking for a step by step guide.

#How to install a dvd player to a tv with cable how to

A lot of people are always searching for information on how to install headrest monitors in their specific vehicle.